Permanent Paint FAQ

Find the instructions for your Luna paint and the format you bought. Start with the label on your product, then use the manufacturer’s guide for that system.

Luna One aerosols

What is Luna One 2.0?

Luna One 2.0 is a permanent direct-to-surface coating with an internal hardener. On suitable, properly prepared surfaces, it combines the colour and finish without separate primer or clearcoat. Check the label for the surfaces and preparation that apply to your project.

Which application instructions should I use?

• Luna One 2.0: Follow the manufacturer’s 2.0 application guide for surface preparation, hardener activation, time between coats and curing. You can also watch the manufacturer’s 2.0 overview.
• Original Luna One 1.0: Follow your can label and the original Luna One application sheet (PDF). The original aerosol has its own spray and recoat directions.

Luna basecoats, midcoats and clearcoats

Which coats do I need for a Luna colour?

Use the recommended basecoat for your selected colour. Pearl, colour-shifting and candy finishes can change with the base underneath. Finish the colour with a compatible permanent clearcoat as specified for that system.

Can I use the same instructions for an aerosol and spray-gun paint?

Use the directions for the format you bought. The spray-gun settings in the liquid basecoat sheet apply to liquid paint. For a colour aerosol, follow its can label and the application guidance on the product page.

How do I choose a primer or clearcoat?

Match the primer to the prepared surface and application. Match the clearcoat to the paint system and finish. Check the Luna technical data sheets for the product’s mixing, application and cure requirements.

Before you start

Read the product label and the applicable safety data sheet for protective equipment, ventilation and handling. The Paint Prep & Application guide can help you find the right instructions.