Permanent paint
Luna One Trim Kits
Direct-to-surface 2K aerosol
No separate primer, adhesion promoter or clearcoat on suitable prepared surfaces
Choose High Gloss or Satin
Restore the black finish on suitable exterior trim, from grilles and mirror bases to window surrounds. Luna One 2.0 is a permanent coating for properly prepared plastic or metal trim.
- Twist-to-activate 2K aerosol for permanent trim refinishing.
- Choose High Gloss Black or the softer sheen of Satin Black.
- Pick a one-, two- or three-can kit to fit the size of your project.
What’s included
- Small: one Luna One 2.0 can.
- Medium: two Luna One 2.0 cans.
- Large: three Luna One 2.0 cans.
All cans in a kit are supplied in your selected finish. Scuff pad and IPA wipe prep supplies are shown with the kits; quantities can vary by kit.
Luna One 2.0 FAQ
Is it peelable? No. This is permanent automotive paint.
Do I need separate primer or clearcoat? Luna One 2.0 is made for direct application to suitable, properly prepared surfaces. Follow the product label for your material and surface condition.
How do I start? Scuff and clean the surface. Activate the internal hardener using the directions on the can, and use the paint within 24 hours of activation. Wear the protection specified on the label and follow its ventilation instructions.
How much time should I allow between coats? The 2.0 guide calls for a light, a medium and a wet coat. Allow about four minutes between coats at 13–24°C (55–75°F), or three minutes above 24°C (75°F). Follow the label and allow the coating to cure before putting the part back into service.
Manufacturer’s 2.0 application guide · Watch the 2.0 overview