Permanent paint
Luna One Aerosols
Direct-to-surface 2K aerosol
No separate primer, adhesion promoter or clearcoat on suitable prepared surfaces
Choose High Gloss or Satin
Give wheels, trim, mirror caps and other suitable automotive parts a permanent black finish with Luna One 2.0. Choose a deep High Gloss or a softer Satin sheen, then select the number of cans for your project.
- Built-in activator starts the two-component cure when you are ready to spray.
- One direct-to-surface coating on suitable, properly prepared parts.
- Two finishes and three pack sizes: single can, 2-pack or 6-pack.
What’s included
Your selected pack contains one, two or six cans of Luna One 2.0 in the chosen finish. Prep supplies are not included in the aerosol packs.
Luna One 2.0 FAQ
Is it peelable? No. This is permanent automotive paint.
Do I need separate primer or clearcoat? Luna One 2.0 is made for direct application to suitable, properly prepared surfaces. Follow the product label for your material and surface condition.
How do I start? Scuff and clean the surface. Activate the internal hardener using the directions on the can, and use the paint within 24 hours of activation. Wear the protection specified on the label and follow its ventilation instructions.
How much time should I allow between coats? The 2.0 guide calls for a light, a medium and a wet coat. Allow about four minutes between coats at 13–24°C (55–75°F), or three minutes above 24°C (75°F). Follow the label and allow the coating to cure before putting the part back into service.
Manufacturer’s 2.0 application guide · Watch the 2.0 overview