Permanent paint
Luna One Wheel Kits
Direct-to-surface 2K aerosol
No separate primer, adhesion promoter or clearcoat on suitable prepared surfaces
Choose High Gloss or Satin
Refinish suitably prepared alloy or steel wheels with Luna One 2.0 permanent paint. Pick High Gloss Black for a deeper shine or Satin Black for a softer factory-style look, then choose the kit for your wheel diameter.
- Two-component paint activates inside the can before spraying.
- Direct application to properly prepared wheels, without a separate clearcoat on suitable surfaces.
- Choose 12″–19″ or 20″+ wheels; prep supplies come with either kit.
What’s included
- 12″–19″: three Luna One 2.0 cans in the selected finish.
- 20″+: four Luna One 2.0 cans in the selected finish.
- Both sizes: three scuff pads and three isopropyl alcohol (IPA) wipes. Tire masking covers are not included.
Luna One 2.0 FAQ
Is it peelable? No. This is permanent automotive paint.
Do I need separate primer or clearcoat? Luna One 2.0 is made for direct application to suitable, properly prepared surfaces. Follow the product label for your material and surface condition.
How do I start? Scuff and clean the surface. Activate the internal hardener using the directions on the can, and use the paint within 24 hours of activation. Wear the protection specified on the label and follow its ventilation instructions.
How much time should I allow between coats? The 2.0 guide calls for a light, a medium and a wet coat. Allow about four minutes between coats at 13–24°C (55–75°F), or three minutes above 24°C (75°F). Follow the label and allow the coating to cure before putting the part back into service.
Manufacturer’s 2.0 application guide · Watch the 2.0 overview